Free shipping on orders over $90+
  • Free Shipping Over $90
  • Authorised Retailer
  • 30 Day Returns
  • Australian Owned
Evy

Evy E-styler

$235.00

Purchase any 2 EVY heat tools and receive 2 FREE EVY Travel Collections valued at $125 RRP!
Offer ends 4 Nov or while stocks last. πŸŽ‰

The EVY E-STYLER with Mineral Infused Technology allows you to lock in hydration for the perfect salon finish.

Extra long blades for easier, faster styling and smoothing!

Quantity
30 Day Returns
Free Shipping Over $90
Authorised Retailer

Check Delivery Time

A 25mm straightening iron built for salon work, where the plate runs longer than a standard iron so each pass covers more of the section. It handles straightening, smoothing and soft bend on most hair types, and the long plate earns its keep most on mid-length to long hair where you would otherwise be making two passes.

The build

  • 1" (25mm) plates, extra long β€” narrow enough for control near the root, long enough to cover a section quickly.
  • Flexible floating plates β€” they move with the section rather than fighting it, which keeps the tension even.
  • MCH heating element β€” the ceramic heater Evy specifies for this iron.
  • Mineral-infused plates β€” Evy's patented mineral technology, infused into the plate surface.

Heat and controls

  • Digital display β€” temperature set and read precisely, from 160Β°C to 230Β°C.
  • Sleep mode β€” the iron switches itself off after 60 minutes unattended.
  • 3 metre swivel cord β€” rotates 720Β°, so it does not wind up on you over a full day of clients.
  • Universal voltage β€” 100-240V, 50/60Hz, so it travels.

Worth knowing

Evy backs it with a 24 month warranty. Work at the lowest setting in the range that gives you the result, and go lower again on fine or lightened hair.

RECOMMENDED TEMPERATURE GUIDE FOR OPTIMAL RESULTS:

  • Fine or damaged hair: 160Β°C
  • Normal healthy hair: 160 - 190Β°C
  • Strong resistant hair: 210 - 230Β°C

STYLING TIPS

1. Plug in the EVY STYLER and press the power button.
The LED light light will illuminate to display temperature.

2. As this plate is temperature controlled, adjust the temperature selecting from 150-220Β°C depending on your hair type and
requirement.

3. Wash and dry your hair and ensure it is tangle free.

4.Spray 3–5 sprays approximately 20 cm from hair, evenly over
mid-lengths and ends. Use before heat styling for thermal protection, shine, frizz
control and manageability. Can also be used after styling to add shine and refresh the
hair.

5. Separate out a section approximately 2 inches in width. Taking finer sections will ensure more intensive styling, which will allow our Mineral Infused Technology to smooth & hydrate your hair.

6. Carefully place the section between the heating plates at the hairline.

7. Now pass the styling iron from the hairline to the end of the hair. Never rest for more than 5 seconds in any one place (especially when using the hotter settings).

8. Repeat the process with the remaining sections until the desired effect is achieved.

9. Apply 5–10 drops to palms and work through mid-lengths and ends. Use on wet or dry hair. For ultra-smooth, high-shine results, apply after Tame Smoothing Cream or layer over your Thermal Spray as a finishing serum.

10. Press the button for 3 seconds to turn off the appliance and disconnect them from the power supply when you have finished the treatment.

10. Allow the styling iron to cool down completely before storing and wiping the plate.

See product packaging for full ingredient list.

A 25mm straightening iron built for salon work, where the plate runs longer than a standard iron so each pass covers more of the section. It handles straightening, smoothing and soft bend on most hair types, and the long plate earns its keep most on mid-length to long hair where you would otherwise be making two passes.

The build

  • 1" (25mm) plates, extra long β€” narrow enough for control near the root, long enough to cover a section quickly.
  • Flexible floating plates β€” they move with the section rather than fighting it, which keeps the tension even.
  • MCH heating element β€” the ceramic heater Evy specifies for this iron.
  • Mineral-infused plates β€” Evy's patented mineral technology, infused into the plate surface.

Heat and controls

  • Digital display β€” temperature set and read precisely, from 160Β°C to 230Β°C.
  • Sleep mode β€” the iron switches itself off after 60 minutes unattended.
  • 3 metre swivel cord β€” rotates 720Β°, so it does not wind up on you over a full day of clients.
  • Universal voltage β€” 100-240V, 50/60Hz, so it travels.

Worth knowing

Evy backs it with a 24 month warranty. Work at the lowest setting in the range that gives you the result, and go lower again on fine or lightened hair.

RECOMMENDED TEMPERATURE GUIDE FOR OPTIMAL RESULTS:

  • Fine or damaged hair: 160Β°C
  • Normal healthy hair: 160 - 190Β°C
  • Strong resistant hair: 210 - 230Β°C

STYLING TIPS

1. Plug in the EVY STYLER and press the power button.
The LED light light will illuminate to display temperature.

2. As this plate is temperature controlled, adjust the temperature selecting from 150-220Β°C depending on your hair type and
requirement.

3. Wash and dry your hair and ensure it is tangle free.

4.Spray 3–5 sprays approximately 20 cm from hair, evenly over
mid-lengths and ends. Use before heat styling for thermal protection, shine, frizz
control and manageability. Can also be used after styling to add shine and refresh the
hair.

5. Separate out a section approximately 2 inches in width. Taking finer sections will ensure more intensive styling, which will allow our Mineral Infused Technology to smooth & hydrate your hair.

6. Carefully place the section between the heating plates at the hairline.

7. Now pass the styling iron from the hairline to the end of the hair. Never rest for more than 5 seconds in any one place (especially when using the hotter settings).

8. Repeat the process with the remaining sections until the desired effect is achieved.

9. Apply 5–10 drops to palms and work through mid-lengths and ends. Use on wet or dry hair. For ultra-smooth, high-shine results, apply after Tame Smoothing Cream or layer over your Thermal Spray as a finishing serum.

10. Press the button for 3 seconds to turn off the appliance and disconnect them from the power supply when you have finished the treatment.

10. Allow the styling iron to cool down completely before storing and wiping the plate.

See product packaging for full ingredient list.

Frequently Asked Questions

Q. What temperature should I set it to?

A. The digital display runs from 160Β°C to 230Β°C. Work at the lowest setting that gives you the result, and go lower again on fine or lightened hair.

Q. Can I take it overseas?

A. Yes. It runs on universal voltage, 100–240V at 50/60Hz, so it travels β€” you'll just need the right plug adaptor for the country.

Q. Will it curl as well as straighten?

A. It handles straightening, smoothing and a soft bend. For a defined curl rather than a bend, Evy's tong range is the tool built for that.

Q. Does it switch itself off?

A. Yes. Sleep mode shuts the iron down after 60 minutes unattended.

Evy E-styler

$235.00

Your Cart (0)

Your cart is empty

Start Shopping
Have a discount code?
Subtotal $0.00

Shipping & taxes calculated at checkout

Checkout

Search